Strip Vents
For Rafters, Cedar shingles & shakes and many other applications to create ventilation
Airflow diagram for BattenVent and RafterVent
  • Strip Vent is an under-plywood, top-of-rafter vent easily installed during the construction of an addition or a new home. The Strip Vent provides adequate ventilation in the spaces to either side of the vent placement.

  • It is a required vent product when your soffit to ridge air flow is blocked by a skylight or dormer. Strip Vent easily allows air movement in those trapped areas.
  • It eliminates the need to drill holes in the rafters to ventilate areas trapped by construction supports. Use it in areas otherwise unventilated and considered problem areas. It is very versatile and can be used on wall surfaces between siding and wall sheathing, allowing air to move between those areas.

  • Strip Vents are made of polyethylene plastic that is 2.75” wide X 37.5” long for maximum on the job installation flexibility. Strip vents come in a variety of thickness to meet your needs. Strip Vents allow air to travel in all directions through the built-in corrugated air channels and acts as a rain and condensate screen allowing moisture to drain and evaporate behind the cedar and other exterior wall panels.

Fascia Strip Vent
Fascia Strip Vents are Ideal when you have limited access to the roof deck.

Below is an application with a 4” x ¾” x 37 ½’ Fascia Strip Vent. This will give you 9 sq. In of NFA per foot for intake.
The fascia board easily gets installed over the Fascia Strip Vent.

We make custom sizes to fit the needs of your job.

“The venting was easy to install and the clients are happy with the finish appearance.”
Nathan C. from WA
Diagrams for installation of Fascia Strip Vents