SmartRoofProducts
  • Home
  • Baffles
  • Gutter Protection
  • Ventilation
  • Accessories
  • Strip Vents

SmartBaffle - Insulation Baffle by DCI

SmartBaffles are the strongest attic insulation baffle available

 

Now you can order the exact number of baffles you will need for your home.
Click on the drop down arrow under the size baffle you need.
Select which size baffles you require from the options below

SmartBaffle 16" for rafters that are 16" on center.(approx 14 1/2" from between beams)
Purchasing options
 
SmartBaffle 24"
Purchasing options

To learn more about SmartBaffles click here

Fascia Strip Vent

Fascia Strip Vents are Ideal when you have limited access to the roof deck.

Below is an application with a 4” x ¾” x 37 ½’ Fascia Strip Vent. This will give you 9 sq. In of NFA per foot for intake. 
The fascia board easily gets installed over the Fascia Strip Vent.

We make custom sizes to fit the needs of your job.

“The venting was easy to install and the clients are happy with the finish appearance.” – Nathan C. from WA

 

Order Fascia Strip Vent by the Piece or by the box

Purchasing options
Click below to add to your order

US RoofVent

 One 20 foot roll of US RoofVent for $59.95

US RoofVent sellsheet

The US Roof Vent is installed on the roof top at the eaves edge under the first course of shingle for intake ventilation. It is designed by professional roofing engineers for attics without soffits or attics that require additional air intake ventilation. The US Roof Vent comes on a roll so it makes for a quicker installation saving you the contractor time on the job site. It is also contractor friendly in that it cuts easily, it is lightweight, it comes on a roll, it allows air flow at all locations within the product, and it costs less than the major competitors. We call this new product a win-win for the contractor. Try some rolls and see for yourself.


Us RoofVent being installed

The US Roof Vent is rated at 9 NFA so it can be used at the soffit for all ridge vents that are rated up to 18 NFA since homes have 2 soffits which equate to 18 NFA of total air intake. The US Roof Vent is crush resistant, installs using air guns or hand nailing and comes with a limited Lifetime Warranty. Use the US Roof Vent at the soffit area for all your roof top jobs to achieve the proper air intake, or simply to enhance the existing air flow. The US Roof Vent can operate with other soffit vents that may be inefficient or even blocked with insulation. Proper exhaust vents are required to complete the attic air flow. The US Roof Vent easily cuts with scissors, shears or a utility knife. This vent can be moved further up the roof under the shingle courses if the soffit is open to the underside of the roof deck. The lowest possible course of shingles to install this vent is recommended. Providing 9 square inches of airflow per linear foot, this vent provides and/or exceeds most local and national code requirements.

This product comes in roll form, 20 feet per box and comes with built-in weather protection fabric to protect against gale force winds, snow and rain.

 Call 888-446-9088 for more details.

 One 20 foot roll of US RoofVent for $59.95

Universal Tapered End Caps

Universal Tapered End Caps

Universal Tapered End Caps are 10.5″ square tapered ventilation pieces that seamlessly blend with US RoofVent to give the roof a more aesthetic and clean finish to your intake ventilation project.

Universal Tapered End Caps

The patented Universal Tapered End Cap can be installed Right Side or Left Side, as you begin your  US RoofVent run or end the run. Designed with the contractor in mind, this easy to install end cap makes working with US RoofVent simple and cost effective. Use it to end a run near a dormer, valley, hip, chimney or skylight.

The Universal Tapered End Cap ‘tapers’ the US RoofVent back down to the roof. All that you need to do is nail it down to the roof. Period! The fabric is already attached at the factory for right hand or left hand installations.

Universal Tapered End Caps were originally introduced to the roofing industry as SmartVent Tapered End Caps.

As time and testing have proven this end cap can be used with most over eave intake vents on the market.

These end caps provide a smooth transition from vent to roof deck. This assures that the shingles will not only look aesthetically clean, but minimizes the wear and possible cracking of the shingles.

Click the cart button and then enter your quantity! Only $6.95 per End Cap!

 

Smart Gutter Strainer

 

The Smart Gutter Strainer is made to protect and provide clear passage of rain water to the downspout no matter what may be getting in your gutters. Made of an industrial strength nylon mesh, Smart Gutter Strainer keeps debris from covering the opening to your downspout.

Easy to install and can be use on almost any size and style gutter. 

No tools are required to install.

Smart Gutter Strainer comes in a package of 8 and is available only through SmartRoofProducts.

If you are tired of your downspout getting clogged with the fall foliage and other debris, here is your solution.
 

Buy and install today so you don't have to interrupt your weekends with unnecessary chores.

8 Smart Gutter Strainers are only $25.00

Free Shipping to Contiguous US!

Eliminate Clogged Gutters

Flo-Free Leaf Guard has been protecting gutters like yours for over 30 YEARS!

Click the image above to learn more!

Page 1 of 2

  • Start
  • 1
  • 2
  • End
  • Contacting SmartRoofProducts
  • Return Policy
  • Terms of Service
Copyright © 2021 SmartRoofProducts
Design and theme by JooThemes.net - Joomla Templates and WordPress Themes.