US RoofVent

If you are a roofer that prefers rolled products,
here is your solution for intake and exhaust ventilation.
Image of the US RoofVent

US RoofVent is the latest, innovative product from DCI Products. With the major success achieved by the SmartVent over the past twenty years, we wanted to offer the contractor a rolled version, but with all the same great benefits.

US RoofVent helps eliminate mold and moisture issues and is virtually unnoticeable once installed. Twenty feet per roll, it is lightweight, easy to handle and has the same versatility as our industry standard product, SmartVent.

US RoofVent is only $64.95 per roll
Shipping via FedEx/UPS ground service is $16.95

Download the US RoofVent installation instructions below

Link to the US RoofVent directions pdf

NOTE: US RoofVent can be installed under virtually any shingle course using proper installation techniques. US RoofVent should be installed on shingled roofs with a minimum of 4/12 pitch. There is no maximum slope limitation. Low slope roofs with less than 4/12 pitch can use FasciaVent by DCI for intake ventilation. Use of continuous ridge vents or other exhaust vents are required. No Moisture from household appliances, equipment or fixtures can be discharged into the attic area.